Frameless Straight Sliding Glazed Sliding Partition System Technical Information

General Technical Information

  Individual panel system.
  Top Rail or Patch Fittings only, guide fittings at floor level.
  Top hung on two point suspension system for various stacking options.
  Maximum of 3no panel sliding each way.
  Passdoors can be supplied with standard ironmongery.
  Maximum panel height is 3300mm (dependant on width of panel and weight of glass).
  Top rails are fitted with cover plate in aluminium, can be finished with paint.


  Various Top track and rails available according to requirements.
  Natural anodized or powder coated to a RAL spec.
  Track can be exposed or concealed within suspended ceiling.
  Multi ball bearings, multi directional trolleys.


  10mm/12mm toughened glass (12mm glass over 2500mm).
  Long edges polished.
  Manifestation/etching can be supplied on request.

Technical Data

  The construction is flush with the surface therefore there are no protruding running or directional tracks
  Can be opened to the inside or outside and is available with a separate or attached turning panel (through 180'). Segment folding systems are possible up to an angle of 45'. Centre pivoting panels are possible
  The profiles have a very narrow visible projection width allowing a very large percentage of glazed surface
  The panel is 45mm thick allowing a maximum panel width of 1100mm.
  Up to I0mm expansion compensation that is made possible due to wide closing rebates meaning that the screen remains impenetrable and continues to function correctly under hot and cold conditions
  Vertical sealing is by means of a double EPDM seal. Horizontal sealing is by means of a double brush seal
  Drainage of the panels can be via a slit cut in the glass groove according to manufacturers guidelines. The ground sill has controlled water drainage to the outside due to the slanting profile formation

Planning Guide


  • Unbroken Aluminium profile system
  • Unit thickness of 45mm
  • Performance Group 'B'
  • Top hung


  • Choose the number of panels.
  • Panel sizes are dependant on the type of glass and their width and height. If necessary, the number of panels must be increased.
  • Choose colour powder coated to RAL or anodised to Euras


  • Decide on the external frame dimensions in relation to to the structural opening, making provision for any necessary installation clearances
  • Decide on floor track
  • Choose colour powder coated to RAL or anodised. to Euras

Versions (seen from the interior)

  • Type I: Opening to the inside
  • Type 0 : Opening to the outside
  • 'Number' L Number of panels opening to the left
  • 'Number' R Number of panels opening to the right


For more information on the , contact our sales department.

Brockhouse Modernfold Limited is the UK market leader in the design, manufacture and installation of acoustic movable walls. Over many years we have developed a range of modular panel systems capable of exceeding the most demanding of specifications.